Thinning is not recommended. I'm going to have to check out that SW product he mentions I tried really hard to get my friend to go to SW or some other "real" paint store and get an oil-based product to paint her chest. This won't help those looking for nitro-fuel proof covering, but it would subtract one of my biggest complaints about latex, it being too soft and fragile in comparison to something like Klass-Kote. You can do it, but you would be better served by using flat paint I also don't think that any hot dishes were set on it either but the spots remain. If varnish is not applied correctly or dried completely, it can peel, crack, or form bubbles that leave wood more susceptible to environmental damage.
Latex enamel, not indoors...
Polyurethane Floor Finish
Lower temperature, higher humidity, lack of air movement or application of thick coats will extend drying times. That being said, if you spray paint something and want to make it really glossy, you can spray a clear gloss topcoat on it to achieve the look. You should be able to use a buffing pad on tables before washing and reusing. Flat Out Flat is a matte water based topcoat with a velvety feel and was developed as a durable alternative to our Satin Wax. I just sprayed it tonight and used a blow-dryer to get it dry to the touch so hopefully in the morning I'll have a nice looking and fairly hard finish, who knows.
Minwax® Polycrylic® Protective Finish | Interior Clear Protective Finishes
Highly recommended and makes my projects so much easier to achieve!! While working with polyurethane, you have to make sure that the room is well ventilated. Claydowling, if you happen to come back by, this statement: High Performance Water Based Topcoat. The first coat works as a primer and sealer; the second serves as a finish coat.
It is nice and works well over paint. Once the resins have dried and hardened they cannot be re-dissolved by water. Minwax Satin Polycrylic. This isn't safe with oil-based products, which require better ventilation; instead, vacuum the area thoroughly before you begin. Avoid contact with eyes and skin. Debris trapped up in polycrylic will create an uneven finish.
1 day ago